1.cast stone lining plate and slot width begins form B=600mm, from 200mm to B=1400mm,
there are two size for Central height of B600、 B800、 B1000.they are H=640mm和H=440mm.but it just has one size H=640mm for B1200、B1400
 
2.
Use and application range：it is used for　transport　ａｎｄ　distributeｄｉｆｆｒｅｎｔ　Moisture　ａｎｄ　granularity　ｌｅｓｓ　ｔｈａｎ　300mm ｃｏａｌｓ　ｆｏｒ　coal preparation plant　　

It can be Horizontal and tilt transport. Horizontal transport. can be devided into single layer and double layers, but tilt transport is just for single layer. This series is mainly horizontal transport. 

The speed of chain : 0.48m/s、0.76m/s
二、installation notice
1、
ｉｆ　ｔｈｅ　conveyer　ｉｓ　ｗｉｔｈ　ｏｒ　ｗｉｔｈｏｕｔ ｇａｔｅ，ｄrive frame, nose, tail frame and intermediate slot bracket, etc　ａｌｌ　ｍｕｓｔ　ｂｅ　elevated　３０ｍｍ　cement．ｔｈｅ　intermediate tank　ｉｓ　ｉｎｓｔａｌｌｅｄ　ａｃｃｏｒｄｉｎｇ　ｔｏ　sequence number　ｏｆ　intermediate tank　ｏｕｔｓｉｄｅ．
2、
Ｔｈｅ　ｉｎｓｔａｌｌａｔｉｏｎ　　should be level, straight．
3、
The chain ring welding mouth　ｓｈｏｕｌｄ　ｂｅ　ｕｐ．

4、
free run　ｓｈｏｕｌｄ　ｂｅ　４　ｈｏｕｒｓ　ａｆｔｅｒ　ｉｎｓｔａｌｌａｔｉｏｎ，ｔｈｅ　ｔｅｍｐｅｒａｔｕｒｅ　ｓｈｏｕｌｄ　ｎｏｔ　ｂｅ　ｍｏｒｅ　ｔｈａｎ　30℃．Ｔｈｅ　ｍａｃｈｉｎｅ　　Should be smooth, no shock, vibration and so on.
 
5、
Ｔｈｅ　ｓｐａｃｅ　ｂｅｔｗｅｅｎ　　intermediate tank　ａｎｄ　ｆｌａｎｇｅ　ｃａｎ　ｂｅ　ａｄｊｕｓｔａｂｌｅ　ｂｙ　ｒｕｂｂｅｒ　ｂｌａｎｋｅｔ．

use and maintenance

1、 Should adjust tightness good two chain before driving, check all bolts loose phenomenon. 
2、
ａｔ　ｔｈｅ　ｂｅｇｉｎｉｎｇ　，ｃｈｅｃｋ　ｔｈｅ　ｂｏｌｔ　ａｎｄ　ｃｈａｉｎ　ｂｅｆｏｒｅ　ｕｓｅ，
 3、
ｕｓｅNo. 1 or 2 sodium calcium base grease　ｆｏｒ　antifriction bearing
4、
 Reducer lubrication should be executed according to operating instructions, ｄｏｎｏｔ arbitrarily change lubricating oil.
5、
Chain operation such as found in "gone with the wind" phenomenon, is due to the casting slab shop repair rough and tank body caused by the product of coal "blind Angle". For this kind of phenomenon is adjustable flat cast slab or flat link in the chain welding on a piece of 8 * 50 * 100 mm steel plate, and 50 0 Angle to the direction, each welding a piece of 8-10 metres, not included in the, in the design of the user in the use of temporary welding according to the situation.
6、
ｉｆ　ｔｈｅ　ｔｗｏ　ｃｈａｉｎｓ　 ａｒｅ　uneven bearing wear，ｔｈｅｙ　ｗｉｌｌ　ａｆｆｅｃｔ　normal engagement，ｙｏｕ　ｓｈｏｕｌｄ　ｃｈａｎｇｅ　ｔｈｅ　ｃｈａｉｎｓ．
7、
Ｙｏｕ　ｓｈｏｕｌｄ　ｃｈａｎｇｅ　ｔｈｅ　ｃｈａｉｎｓ　ｗｈｅｎ　ｔｈｅ　  screw　ｄｏｅｓ　ｎｏｔ　ｗｏｒｋ　ｗｅｌｌ．
8、
ｔａｋｅ　ｃａｅ　ｏｆ　　ｔｈｅ　ｓｃｒｅｗ　ｃｌｅａｎ．
9、Double transportation, scraper chain scraper assembly (deformed steel) should be positive and negative interval; In a two-way transport, scraper should be about interval assembly, chain in order to prevent the runtime.

ｔｙｐｅ
10、
ｙｏｕ　ｃａｎ　ｉｎｓｔａｌｌ　ｔｈｅ　ｓｗｅｅｐｅｒ　ｆｏｒ　ｔｒａｎｓｐｏｒｔ　　ｔｈｅ　ｌａｒｇｅｒ　 lump coal，gangue　ａｎｄ　ｓｏ　ｏｎ．
11、Turn adjusting screw with the tool (round steel Ф 24) solution by the users themselves.
四、use and maintenance　ｆｏｒ　ｇａｔｅ
1、 
Add the lubricating oil ｆｏｒ　bearing regularly.
2、
ｏｆｔｅｎ　ｃｌｅａｎ　 pinion and rack
3、
ｃｈｅｃｋ　ｔｈｅ　normal engagement　ｆｏｒ　pinion and rack

4、
ｍａｋｅ　ｓｕｒｅ　ｔｈｅ　ｇａｔｅ　operate flexibly